0.13 μm标准CMOS工艺的高可靠流水线模数转换器

针对航空航天电子系统对高性能模数转换器的需求,采用0. 13μm标准互补金属氧化物半导体工艺,设计可以在极端温度和空间辐射环境中稳定可靠工作的12位分辨率、50 MS/s采样率的流水线模数转换器。通过采用无采样保持电路以及抗辐射电路和版图加固等技术,在减小功耗的同时有效地削弱总剂量辐射效应的影响。测试结果表明:在-55～125℃温度范围内以及150 krad(Si)的总剂量辐照条件下,得到大于64 dB的信噪比、大于73. 5 dB的无杂散动态范围和最大0. 22 dB的微分非线性。     

J2摄动下卫星编队重构的多脉冲轨迹优化

针对考虑J_2摄动的椭圆参考轨道的编队重构问题,以消耗燃料最少为目标函数,基于高斯变分方程研究编队重构的多脉冲轨迹优化方法。推导考虑J_2摄动和轨道面内外耦合的轨道要素偏差线性动力学方程,采用遗传算法和序列二次规划结合的混合算法对总的速度增量进行优化。数值仿真表明该混合算法有效,可以高效地得到可行解。由于考虑了J_2摄动和椭圆参考轨道,该算法对航天任务中的轨迹优化具有一定的参考意义。     

Past failures and future problems: the psychology of irregular war

Personal cognitive processes inform how individuals understand their environment. Cultural variation, fundamental attribution error, causal attribution, and durability bias create obstacles to Western understanding of irregular war and have created a significant institutional bias in how the US military perceives its enemies- a perception only somewhat softened after a decade of irregular war. United Special Operations Command (USSOCOM) is in a better position to overcome these problems through persistent engagement. In the event of major conflict, environmentally sensitized military planners will be better able to achieve military and policy objectives.     

一种对时钟偏差不敏感的无源RFID标签编解码算法

基于我国自主射频识别空中接口协议GJB 7377.1-2011,提出了一种对时钟偏差不敏感的无源RFID标签编解码算法。该算法充分考虑了时钟频率偏差、计数误差、分频误差等对编解码的影响,推导出了标签正确编解码所需的时钟约束条件,并得到了标签编解码的基本思路和方法。仿真结果表明,提出的编解码算法对标签时钟精度要求较低,只要时钟频率大于1.60 MHz,即可满足要求,大大降低了硬件实现的难度和复杂度,与同类实现方式相比,功耗降低了近50%。     

Deterministic and stochastic scheduling with teamwork tasks

We study a class of new scheduling problems which involve types of teamwork tasks. Each teamwork task consists of several components, and requires a team of processors to complete, with each team member to process a particular component of the task. Once the processor completes its work on the task, it will be available immediately to work on the next task regardless of whether the other components of the last task have been completed or not. Thus, the processors in a team neither have to start, nor have to finish, at the same time as they process a task. A task is completed only when all of its components have been processed. The problem is to find an optimal schedule to process all tasks, under a given objective measure. We consider both deterministic and stochastic models. For the deterministic model, we find that the optimal schedule exhibits the pattern that all processors must adopt the same sequence to process the tasks, even under a general objective function GC = F(f₁(C₁), f₂(C₂), … , f_n(C_n)), where f_i(C_i) is a general, nondecreasing function of the completion time C_i of task i. We show that the optimal sequence to minimize the maximum cost MC = max f_i(C_i) can be derived by a simple rule if there exists an order f₁(t) ≤ … ≤ f_n(t) for all t between the functions {f_i(t)}. We further show that the optimal sequence to minimize the total cost TC = ∑ f_i(C_i) can be constructed by a dynamic programming algorithm. For the stochastic model, we study three optimization criteria: (A) almost sure minimization; (B) stochastic ordering; and (C) expected cost minimization. For criterion (A), we show that the results for the corresponding deterministic model can be easily generalized. However, stochastic problems with criteria (B) and (C) become quite difficult. Conditions under which the optimal solutions can be found for these two criteria are derived. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

一种图像去模糊正则化恢复算法参数确定方法

为了解决模糊正则化恢复算法中参数确定问题,提出一种正则化参数确定方法,该方法根据降质图像特征计算正则化参数.分析了目前普遍应用的全变分正则化方法和该问题的改进拉格朗日迭代解法(SALSA),分析不同正则化参数对恢复效果的影响,提出的正则化参数确定方法与噪声和原图像梯度大小相关.对不同梯度和噪声图像的不同正则化参数恢复效果进行对比,得到提出的正则化参数确定方法能使恢复图像的改进信噪比处于最大值附近.从实验视觉效果得出,该参数确定方法能够抑制降质图像的噪声并能够尽量恢复原图像细节信息.     

柱壳极限分析的广义变分原理

本文提供了适用于满足简化Mises屈服条件的刚塑性体柱壳极限分析的两类变量广义变分原理,并证明了它与柱壳极限分析的全套方程和条件等价。     

GNSS自适应天线相位中心评估方法

自适应天线在波束形成过程中会引起天线相位中心变化,针对这一问题,提出一种基于可用波束的自适应天线相位中心评估方法。该方法分为三步:设置天线的可用波束门限;在干扰来向均匀分布下,得到天线可用波束门限内相位方向图集合;利用最小二乘法对相位方向图集合进行拟合得到自适应天线的平均相位中心变化量。运用该方法对四种典型的四元阵相位中心进行对比仿真,结果表明,算法可以快速有效地对自适应天线相位中心性能进行评估。另外,通过设置适当的可用波束门限,可以提高自适应天线的相位中心性能。算法的评估结果可以作为GNSS高精度自适应天线阵型选择依据。     

S弯进气道合成双射流流场控制特性分析

针对飞翼布局无人飞行器中S弯进气道明显流动分离和出口总压畸变等问题,提出了基于合成双射流的主动流动控制方法,建立了合成双射流的S弯进气道数值仿真模型。结果表明,在S弯进气道分离点附近施加合成双射流控制,在整个射流周期内通过“吹”“吸”接力可以有效抑制边界层流动分离,有效提升总压恢复系数。对比研究了合成双射流不同射流角度、射流峰值速度和激励频率对S弯进气道流场控制特性的影响规律。结果表明合成双射流与主流的角度越小,流动分离控制效果越好,较大射流峰值速度会对主流形成“阻挡”致使控制效果下降,激励频率与流场特征频率越接近控制效果越明显。     

Preservation of stochastic orders for random minima and maxima,with applications

It is shown, in this note, that the right spread order and the increasing convex order are both preserved under the taking of random maxima, and the total time on test transform order and the increasing concave order are preserved under the taking of random minima. Some inequalities and preservation properties in reliability and economics are given as applications. © 2003 Wiley Periodicals, Inc. Naval Research Logistics, 2004.